DESCRIPTION
Koro ProFlexx Slab Waterproof Paint is a modified Styrene Butadiene emulsion additive that is mixed with cement or cement-sand mortar to improve adhesion and waterproofing properties.
KEY FEATURES
-
Excellent adhesion;
-
Minimize shrinkage;
-
Increase elasticity;
-
Excellent waterproofing;
-
Increased chemical abrasion resistance.
-
Non-toxic;
-
Does not re-emulsify even under highly alkaline conditions.
-
Density (at 25oC): 1.02 kg/l.
-
VOC content, < 35g/liter
-
Consumption: 4 m2/kg/layer and depending on the surface state.
-
Packing size: 1liter, 5 liters & 18 liters
-
Storage period: 24 months.
Surface preparation
-
Concrete surface must be clean, in good condition, free from grease, cement dust and other adhering impurities.
-
Saturate the entire absorbent surface but do not allow water to stagnate.
Paint application
Use as a bonding agent for old and new concrete
-
Mixing ratio: 4 kg of cement + 1 liter of Koro ProFlexx Slab Waterproof Paint + 1 liter of water for covering about 4 m².
Using as waterproof floor plaster
-
Mix ratio: Cement : Sand = 1 : 3 (1) Koro ProFlexx Slab Waterproof Paint: Water = 1 : 3 (2)
-
Pour mixture (2) into (1) and mix until the consistency is suitable for application.
Construction
-
Apply the waterproofing mortar layer as soon as the connecting oil (grouting) layer is still wet;
-
Consumption density: 1 liter ProFlexx/m² for a 2 cm thick of mortar;
-
Cleaning: Clean all tools and equipment with clean water immediately after application.
Important Instructions
-
Always mix cement into Proflexx water as a binder;
-
Follow standard of maintenance practices;
-
Always saturate the application surface but do not allow water to stagnate;
-
If applying multiple layers, apply while the previous layer is still wet.
